Rabbit mesh production is the easiest business
The production of the chain-link netting is the easiest business for home use. This business idea requires a small investment of funds. It is possible to organize profitable production of a grid of the chain-link in house conditions by means of the equipment made by own hands (drawings are described below). Over time, you can buy ready-made automatic machines. Production technology is one of the simplest. Start your own production in three steps:
Using the machine, weave a roll of the chain-link.
Sell the product at market value.
Profitability of business from 70%. The grid the chain-link belongs to construction materials, so, it has a seasonality of active sales (6 months) and constant demand. It is impossible to replace it in the farm with cheaper fencing materials. Let us consider in more detail all the stages of the organization of the simplest home business.
MANUAL MACHINE FOR WEAVING A GRINDER MESH OWN HANDS
Scheme of the machine.
We make the machine for the chain-link mesh with your own hands. To understand the principle of operation of coiling machines, first analyze the design features of the finished product.
How to make a netting netting with your own hands at home? The grid the chain-link represents a chain of springs. Each individual line of the netting of the chain-link has the shape of an oval spring, if you look at it from above (from the front side). In the process of forming a spring from a wire, the second operation of weaving it into the previous spring simultaneously occurs. Thus, weaving a whole canvas. Such a simple principle of operation of the machine during production, allows you to make a high quality working net at home. The only limitation is performance, which is at a satisfactory level.
For the formation of oval springs of wire, it is necessary to make the coiling base of durable steel. As well as a screw sleeve, which sets the same pitch of turns. Together, these two parts form a spiral winding device that is the basis of the principle of the machine. The winding bar is quite easy to make, as shown in Figure 3. A sleeve is a more complex part. It should be made of metal pipe with an outer diameter of 55mm. Along the whole pipe it is necessary to turn a spiral groove at an angle of 45 degrees on a lathe. 72mm groove pitch. channel width in the slot 7mm. Now you should correctly connect these two parts, placing the coiled base inside the sleeve with a spiral channel. In order for the plank to rotate freely inside the liner, it is necessary to match their axial centers precisely. Making a solution to this problem will help the manufacture of stands and racks. The sleeve is connected to the stand by a welding seam. A bar with a pivot is connected pivotally, as shown in the figure. A knob or pulley is connected to the hinge for the transmission from the electric motor.
The machine is fixed on the table so that the length of the table is not shorter than the length of the coils. Rotating the coiling base (bar) wire is wound onto it with the correct bends and coil pitch, which provides a spiral channel in the sleeve. The wire moves along the bar and rotates into the previous coil. After reaching a certain length bites off with scissors for metal. Next, the process is cyclically repeated until a web of the required roll length is formed.
To make this device do not need drawings, just look at the schematic representation of the principle of operation. And the size of the nodes depends on the desired cell size in the finished product.
DEMAND FOR MESHING STANDARD
Rolls of mesh.
The grid the chain-link is always demanded in the market of construction materials. Of course its demand is seasonally sensitive. But in the period from April to October, the sales of rybitsa mesh is characterized by good stability. According to marketing analysis of building materials, a netting is bought in 85% of cases for the construction of various types of fencing. For example:
fencing at construction sites and suburban areas;
construction of enclosures for agricultural species of birds and animals;
making of sapettes for storing hay and some types of fodder or firewood.
10% of the needs relate to construction. For example:
reinforcement for plastering;
strengthening of relief slopes.
The remaining 5% is used for other less popular purposes.
The price of the grid is formed depending on certain conditions:
Design features: diameter of the wire; cell size and shape.
Type of consumables: galvanized metal; stainless steel; aluminum; polymer coated; ordinary low carbon metal.
Roll size (length height).
The above pricing factors determine the range of products manufactured. For example, it is easy to attract buyers today with a grid with a polymer coating. Wider range = more sales.
PROFITABILITY OF PRODUCTION OF THE GRINDER MESH
Rolls of mesh.
The profitability of the home business for the production of mesh netting at an attractive level for investment.